Ideal for trade and industrial use

As a leading innovator in green cleaning products, Sydney Paint Stripping introduced SOY•Gel™ as a soy based paint remover, and changed the industry. SOY•Gel™ is 100% biodegradable, practically odorless, and is safe for your hands, your work, and your customers. It is our most-asked-for product, SOY•Gel™, continues to impress contractors with it’s ease of use and powerful removal properties. With three times the coverage rate of traditional petroleum removers, SOY•Gel™ effectively removes multiple layers of topical sealers, acrylics, enamels, urethanes, latex, some epoxies, and other single-component coatings. Made with soybeans, SOY•Gel™ is a safe, low-odor, non-caustic, green coating remover.

Not just some lead paint removal– we’re here for any substance

– Formerly known as SOY•Gel™ Paint and Urethane Remover
– Removes Multiple Layers In One Application
– SAFE! No Methylene Chloride
– Made with 100% American Grown Soybeans
– Gel Formula for easy application.
– GHS Compliant
– Low Odor

It is our the most-asked-for product, SOY·Gel™, continues to impress contractors with it’s ease of use and powerful removal properties. With three times the coverage rate of traditional petroleum removers, SOY·Gel™ effectively removes multiple layers of topical sealers, acrylics, enamels, urethane, latex, some epoxies, and other single-component coatings. Made with soybeans, SOY·Gel™ is a safe, low-odor, non-caustic, green coating remover. 

As a leading innovator in green cleaning products, we are proud of introducing SOY·Gel™ as a soy based paint remover to the industry. SOY·Gel™ is 100% biodegradable, practically odorless, and is safe for your hands, your work, and your customers. 

Coverage:

Coverage per m² (square foot) varies depending on the type and age of coatings, number of layers and method of application.
Horizontal: Average coverage is 3.0 m² per liter (125 sq. ft. per gallon) (up to 4.8 m² per liter (200 sq. ft. per gallon)

Vertical: Average coverage is 1.8 m² per liter (75 sq. ft. per gallon). 

Application: Due to variances in surfaces and conditions, test in a small, inconspicuous area before using on complete project.

Apply a thick layer of SOY·Gel™ by pouring, brushing, squeegee, or commercial airless sprayer.
Applying too thin will cause SOY·Gel™ to dry out before removal is complete.
Use a scraper (link) to check if the coating is softened down to the surface.
If not, wait longer and recheck. When the coating is completely softened, remove with a scraper. 

Clean Up:
Use Degreaser or water and a scrub brush, mop, or power washer to clean remaining thin residue.
Remove excess coating(s) and before using a power washer for final cleaning.

Allow surface to dry before further preparations. 

Usage Tips from the Pros: For large application areas, use a professional airless sprayer or a 4 stage HVLP sprayer. For tough coatings or numerous layers, use a notched 1/2″ squeegee or 1/4″ gauge rake. Square meter rate will be greatly reduced. When used outdoors, cover with a thin polythene (3m Hand-Masker, clingfilm, plastic bag, bin liner, glad wrap etc.) to help keep SOY·Gel™ wet and working. 

Precautions: Concrete surfaces may darken with use of 600GL. Protect plants and vegetation with a plastic drop cloth. Always use care to prevent overspray from getting on surfaces other than the one being prepped or cleaned. 

Warranties: Sydney Paint Stripping warrants only that the product delivered will be free from defects in workmanship and material at the time of purchase. Under no conditions or circumstances is Sydney Paint Stripping liable for loss, damage, expenses or consequential damage resulting from use of this product.